TUEC Scholarship Program TAUD Tournament Trail Contact Us. I see in the post process configurator that there is a line of the code dedicated to writing a line for 'SET ZSHIFT', however I cannot find the setting within Fusion to enable this function. Thermwood LSAM Large Scale Additive Manufacturing. Works like a charm! I keep the flycutter mounted in the toolbar and can have the board surfaced in just a few minutes. Thermwood typically uses a 'ZSHIFT' for defining the top of the material blank & all Z motions are relative to this height. In this time period specified in the program any axis motion is stopped, while all other program commands and functions remain unchanged (function normally). I love the \"Set wasteboard to desired thickness \" feature. Dwell is a technical name for a pause in CNC programs it is an intentional time delay applied during program processing, at the machine. I cut the perimeter and then call a label ( I don't remember if that's the right term) that cuts back and forth on the X axis with 1 7/8 stepover. Clear fibres and ribbons will be held in place with BC-600 epoxy and then fly-cut using. The trick with fly cutter geometry is converting the geometry of an appropriate lathe tool to behave given the geometry of how the fly cutter will engage the workpiece.
#THERMWOOD FLYCUT PROGRAM UPGRADE#
What size vacuum pump are you using on 4x8 tables? Told the boss we should upgrade to 40 hp and he wondered why the salesman thought 18 hp was enough.įorrest, Thanks for the flycut program. The plate is positioned on the Thermwood x-y milling table. I could hear a little air escaping? past the gasket slot, but so far no part movement. along with the inability to flycut an uneven table, so i have modified my. I need to flycut the spoilboard and see how even I can get the cut thru. new on this Thermwood Machine, and am using artcam as my toolpath program. After flycutting the wasteboard, I started a job with lots of small parts.
0 kommentar(er)
